Teddy & Architecture: June 2012

COMPUTER APPLICATION 2 : PROJECT 2

After learning how to do NURBS curve in 3D max, I redo the whole things in 3D max. Same thing is that I started out with the smaller part of the building.

After that trying to do the top curve, adjusting the height and slant of the curve line. After that, try lofting it.

After it was done, I start to do the platform. Firstly, i do the outline of the platfrom and start extrude up.

After done extruding, trying to group them together as one so that I can easily select them anytime.

Then I separate the elements at the platfrom, the railing , the blue rubber, and the platform by detaching them.

Then I try to loft them to check out the effects. Currently okay :D.

So now trying to do the final part of the building. Creating form of the curve part.

Since the curve is curved at the side, and top. Therefore by using Curve CV, to adjust each and every points to the desired curve.

Finally done with the adjustments of the points. Took almost 4 to 5 hours to adjust it. Eventhough it still does not turn out to be what I desired it to be ><.

Then I try lofting it to check of the form and shape of the whole building. Turn out pretty nice :D.

After its done, i decided to add in interior which is the most difficult part of all. It took me around 3 to 4 days to do with the interior form.

And Finally , i tried to loft all of them as well as the roof which done together with the interior. Almost a week to done the whole thing. Thickness of wall and roof were the most difficult part due to unknown error which cannot be extruded ><.

But it turns out very interesting :D and i'm satisfy with it :D.

Here are some of the photos I had rendered, but it is not in the best condition where there is no landscape

><.